GHBalancer Header
HomePartsServicesQualifications
 
PB-1000A
  
 
Weight Range
Pro-Ball 1000 Analog
  
3-1000 lbs.  
Drive Motor  
1 HP (DC Variable Speed)  
Power Requirements  
.110V 15AMP
single phase 50/60 hz, AC**		  
Electronics Minimum Unbalance  
110V
single phase AC
 0.01 oz./in. (Detectable)  
Length Diametral Range  
5 - 55 in. Between Support Beams 0.5 - 44 in. Between Support Beams  
Rotor Correction Rotor Diameter  
Min. 3 in. Diameter Max. 79 in. Beyond Bearings  
Diameter Range Drive Diameter  
Up to 8.25 in. at Support Bearings 24 in. Capacity  
Cradle Base  
5 ft. in Length  
Solution Graphics
Engine Builders Association
GH Balancer Service 2919 W. Irving Park Rd. Chicago IL 60618